Correctly interpreting 'dead in shell'

Tags: Hatchery management | Whitepaper

Written by Gerd de Lange, 22 June 2013

Correctly interpreting 'dead in shell'

A high percentage of “clears” is usually regarded as a breeder farm or egg handling problem, whereas a high rate of late embryonic mortality is more likely to be seen as a hatchery failure. While suboptimal incubation conditions may indeed be responsible, other non-hatchery factors should not be overlooked. 

Determining, recording and monitoring levels of late embryonic mortality is good practice - and can be valuable to optimizing hatchery results.

It is not uncommon for the term “Dead in Shell”, or ‘DIS’, to be used instead of “late embryonic mortality”. Logically one would expect DIS to represent late embryonic mortality. But the question remains: on which day during incubation does mid-mortality stop and late mortality begin? 

To avoid confusion around this definition, especially when sharing data with other hatcheries or consultants, it is recommended that DIS, as well as late mortality, are defined as follows: “All embryo’s that died after the start of yolk sac retraction into the abdominal cavity, therefore all embryonic mortality after approximately day 17.” According to this definition, DIS includes all embryos that died after transferring the eggs from setter to hatcher. It is worth noting that ‘live pips’ are not included in this definition, and raised numbers of these point either to pulling the chicks too early, or to too broad a hatch window.  

Determining the true level of DIS can be problematic, as counting them accurately is not practically achievable. This is in contrast to “clears”, which are either counted electronically by the automatic candling equipment, or by simply counting, for example, the number of 30-egg flats with clears when using a simple candling table or hand candling lamp. 

It is therefore not uncommon for DIS to be calculated based on the number of eggs set, minus clears removed during candling, minus hatched chicks. While this method is easy and fast, it still may not accurately provide the actual levels of DIS or late embryonic mortality, as defined above. Consider the following simplified example, derived from actual practice:

From a batch of 100 set hatching eggs, 15 clears are removed during candling. The remaining eggs are transferred to the hatcher, to produce 74 first class chicks and one culled chick on hatch day. The hatchery manager calculates 100 – 15 – (74+1) = 10 DIS, or 10 per cent of eggs set. For DIS as defined above (ie. mortality after 17 days) this is far too high and could indicate considerable challenges in the hatchery. However, performing a break-out on the 10 unhatched eggs still remaining in the hatcher basket after chick take-off finds: five clears (including one infertile egg and others with mortality up to the “dark eye stage”); one mid-mortality and four late mortality embryos, in which retraction of the yolk has actually started. So in reality, DIS is in fact much lower, at just 4 per cent. 

From this example, it can be concluded that DIS-figures should be interpreted with great care to avoid hasty or incorrect conclusions.

Advice 

  • Determine, record and monitor DIS-levels on a regular basis in at least six baskets per batch.
  • Recognise that a calculated DIS-level (eggs set – clears – chicks) may not represent the actual percentage of late mortality.
  • Perform a break-out of all unhatched eggs (after candling) from at least six baskets per batch to determine the actual percentage of late mortality.
  • Pay attention to special observations while performing an egg break-out, such as the wetness of embryos, malpositions/malformations, rots and cracks and delayed chicks (“live pips”), as these provide relevant information for the optimization of hatchery management and the finetuning of incubation parameters.
  • Take corrective actions if DIS-levels exceed your hatchery specific flock-age dependent standards. 

Written by Gerd de Lange

Senior Poultry Specialist

I welcome your feedback on this article - and if you require any additional information, please don't hesitate to contact me.