Hatcher basket destacker
To automatically convert a stack to single baskets ready for re-use
Benefits
For the safe, stable destacking of hatcher baskets, the destacker automatically breaks down a stack to supply empty hatcher baskets ready for re-use, for example via an automatic transfer system. The destacker accomodates baskets stacked lengthways or crosswise, so it is suitable for use in every hatchery situation. Easy-to-run and operator friendly with very low noise/vibration emissions. Requires zero-to-minimal maintenance for a long life.
How it works
- A stack of empty hatcher baskets is transported to the destacker
- The stack is automatically loaded into the destacking unit
- The destacker raises the entire stack upwards, leaving the bottom basket on the conveyor, which is transported to the transport conveyor system
- The remaining stack is lowered onto the conveyor and the entire stack, without the bottom basket, is then raised again
- This sequence is repeated until the entire pile of baskets has been destacked and a new stack is loaded into the system
Technical specifications
| Capacity | Up to 800 hatcher baskets/hour |
| Max. lifting capacity | 250 kg |
| Installed power | 5.5 kW |
| Air consumption | 33 litre/min at 8 bar |
| Dimensions (LxWxH) | 1648 x 1600 x 1635 mm (excl. conveyors and manual loading station) |
| Material | Constructed of stainless steel AISI304 for easy cleaning with high-pressure equipment |
| Including | Easy operating control unit and adjustable stack height |
| IP Marking | Motors IP55, Sensors IP68/IP69, Control panel IP66 |
Downloads
